Automatic Butane Gas Filling Machine

• Customization: Available
• After-sales Service: Yes
• Type: Aerosol Filling Machine
• Automatic Grade: Automatic
• Material Type: Gas
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Multi-Room Feeding
• Dosing Device: Capacity Cup
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Pneumatic Lifting
• Structure: Linear
• Packaging: Box
• Packaging Material: Metal
• Origin: China

Product Description

Can feeding machine 

Products Introduction:

Driven by the fireproof motor, the aerosol cans will be automatically transfer on the can feeding machine to convey, there will be no squeeze cans, block cans and inverted cans. Speed can be adjusted freely

Technical Parameters:

1. Explosion-proof motor power:0.75kw

2. Speed range :4.5-23r / min

3. Overall size: 2000 * 1280mm

Stainless steel plate: 1.2mm thick 304 stainless steel

Automatic valve inserting machine for butane valve

Products Introduction

The vibrating coil will arrange the butane valve automatically, sending the butane valve to the automatic pressing machine. The machine can increase the automation and reliability of the line, increase the productivity.

Technical Parameters:

1. Max air consumption: 0.8-1.0 m3/min/0.8-1.0MPa

2. Applicable cap: 1 inch butane valve

3. Capacity: 50-60 cans / min

4. Power consumption: 0.3kw

Air pressure: 0.6-1.0MPa

Automatic vacuum & sealing & gas filling machine

Products Introduction:

It is provided with a vacuuming & a sealing & 3 gas filling heads, 2 booster pumps, as well a gas storage tank with an energy accumulator; full pneumatic control with main parts are imported from Italy or Japan. It has the feature that guiding devices are provided at both sealing head and inflating heads, reliable sealing quality, less leakage of gas inflating. Advise:  build a filling room, to enhance security and reduce the risk of explosion.

Technical Parameters:

1. Capacity of each filling head:30-300ml

2. Filling precision: ≤ ± 1%

3. Applicable Can:70-350mm

Filling speed :40-50 cans /min

QZJ automatic weighting machine

Products Introduction:
This machine adopts advanced weight sensor with special detection device and uses Siemens PLC and Schn e i d e r  low voltage electrical component, the electricity parts are protected with explosion proof device, also with the function such as adjustable stepless motor, human-computer dialogue interface, related fault and waiting for feeding indicator, it could detect the weight for each finished can, and reject the unqualified can automatically. It has advantage of easy operation, fast speed, high accuracy and good stability.
 
 
Technical Parameters:

1. Allowance: ≤±1g

2. Max. weight: 0-1500g

3. Capacity: 60-70cans/min

4. Working pressure: 0.5MPa

Power: AC220V

Automatic water-bath leak tester

Products Introduction:
This machine conveying the can from conveyor to main body by explosion-proof motor driving main sgaft and screw can-divide device; the main shaft drive the hanging type sprocket to circulate continuously, so as to achieve can rotary, raise, and the hanging paw will be compressed and rebound then to finish the hanging of the can; by guide sprocket, enter into the water tank smoothly, after soaking 3-5min, the worker could observe the soaking situation and to check whether it is leaking or not through inspection window, if the can is leaking, we could take out it through the window, those tested cans will be dried the residual moisture by blower and side wind, after enter main machine body, the can could be dropped off by drop-can system, and then conveyed to the conveyor by outlet star wheel, drying system is hot air provided by blower to ensure the drying effect.
 
Technical Parameters:

1. Temperature accuracy: ± 1 ℃

2. Water heating power: 45kw

3. Drying power: 3kw

4. Water tank capacity: 1.1m3 

5. Max air consumption: 3 m3/min/0.6MPa

6. Capacity: 60-70cans/min

Soaking time: 3-5min

Automatic cap presser machine within cap elevator

Products Introduction:
The machine consists of cap feeder, sorter, rail and a main machine. The feeder hopper can put the some caps in it, and will automatically convey the caps into the sorting machine with automatic detection of falling material device. The material sorter automatically arranges the cap into the rail and delivers it to the star wheel of the main machine under the action of compressed air. The main machine drives the aerosol can and the cap to slide to a predetermined position, and the pressure mechanism of the cap receives a signal and presses down the air pressure to press the big lid on the aerosol can. The speed and pressure of the downward pressure can be adjusted. The movement of the machine is fully automatic, no need for manned operation, which really achieves the effect of saving manpower.
 
Technical Parameters:

1. Capacity: 60-70cans/min

2. Power: AC220V, 50HZ

3. Pressure: ≥0.6Mpa

4. Air consumption: ≥0.3m³/min

Cap elevator motor: 0.37KW

Conveyor, ex-motor and packing table

Products Introduction:
This part is supplementary part of the automatic line.
 
Technical Parameters:

1. Conveyor length: 20m (based on customer request)

2. Explosion-proof motor: 4sets

Packaging table: 2025 * 600mm (can be customized)